Service Hotline
+86-029-89104895
News
Home > News > Content

Product Categories

DIN 2391 St 52 Roller Burnished Steel Tubes

Shannxi Shew-E Steel Pipe Co.,Ltd | Updated: Jun 29, 2017

DIN 2391 St 52 Roller burnished steel tubes


Roller burnishing is performed on the return stroke. The plastic deformation taking place provides a surface finish of Ra= 0.05 - 0.20 µm - better than broaching, grinding or even honing. Roller burnishing also means an improvement in surface hardness.Roller burnishing steel tubes made mainly for the hydraulic cylinder industry and other applications where fine-finishing of the internal diameter of a tube is required, Primarily for hydraulics in the contracting, mining and construction industries.

DIN2391 ST52 Seamless Cold Drawn Roller Burnished Tube for Hydraulic Cylinder.jpg

DIN2391 ST52 Seamless Cold Drawn Roller Burnished Tube for Hydraulic Cylinder :ID180mm * OD210mm * L6000mm

 

Standard :DIN 2391(EN 10305-1)

Steel grades : St 52 (E355)

I.D. tolerance:H8

Inside diameter :between 20-1500 mm

Outside diameter : between30-1600mm

Tolerance of Wall Thickness ±7%

Surface finishing: roughness Ra < 0.40 µ (average 0.15÷0.35 µ)

Chemical composition and property of DIN2391 ST52 Cold drawn seamless Roller burnished steel tubes

STEEL GRADE % Max

C

Mn

Si

P

S

0,22

1,60

0,55

0,025

0,025

Tensile strength Min

640 mm²

Yield Point Min

560 mm²

Elongation % min

14

 

SHEW-E STEEL PIPE stock cold drawn steel tubes, seamless DIN 2391 grade St 52, or welded DIN 2393  grade St52.3, in stress relieved conditions (BK+S).The tubes are hot rolled according to DIN 2448/1629,grade St52 On request St52.3 N ( normalised tubes). 

send inquiry.jpg

Feedback
Send
Contact Us
Address: SanQiao, Feng East New Town, New West Ham Xi'an City, Shannxi Province.
Tel: +86-029-89104895
Fax: +86-029-89104895
E-mail: info@shew-esteelpipe.com
Copyright © Shannxi Shew-E Steel Pipe Co.,Ltd All rights reserved.
Friend Link  Ductile Iron Pipe Fittings